Luxcom: Rockville
LUXCOM: ROCKVILLE is available in 4 colors: Dune, Taupe, Grey, and Graphite.
Available Sizes: 12″x24″ and 18″x36″.
Available Coordinating Trims: Quarter Round, T-Molding, Reducer, End Cap, Overlap Stair Nose, and Flush Stair Nose.
Construction: Rigid Core
Installation: Rigid Click (SPC)
Dune
Taupe
Grey
Graphite
Size Availability
SIZE | COLORS |
12”x24” | Dune/Taupe/Grey/Graphite |
18"×36" | Dune/Taupe/Grey/Graphite |
Coordinating Trims
Flush Stair Nose
T-Molding
Reducer
End Cap
Overlap Stair Nose
Quarter Round
PIECES | SIZES | COLORS |
T-Molding | 1.75”x72” | Dune/Taupe/Grey/Graphite |
Reducer | 1.75”x72” | Dune/Taupe/Grey/Graphite |
Flush Stair Nose | 4.5”x94” | Dune/Taupe/Grey/Graphite |
End Cap | 1.5"×94" | Dune/Taupe/Grey/Graphite |
Overlap Stair Nose | 2"×94" | Dune/Taupe/Grey/Graphite |
Quarter Round | 1"×94" | Dune/Taupe/Grey/Graphite |
TECHNICAL INFORMATION
Technical Data | Standard | |
Thickness | ASTM F386 | 6.5mm |
Size | 12" x 24” | |
Wear Layer | ASTM F410 | 20 mil (0.50) |
Edge | Painted Bevel | |
Standards | ASTM F3261 | Pass |
Critical Radiant Flux | ASTM E648-06 | Class 1 |
Friction Coefficent | ASTM D2047 | 0.5 compliance varies with surface texture |
Abrasion Resistance | ASTM D4060) | 34.2 mg/1000 cycles |
Dimensional Stablity | ASTM F2199 | Pass <0.2% |
Static Load | ASTM F970 | Modified at 1000 psi |
Residual Indentation | ASTM F1914 | Pass 0.007inch(3%) |
Environmental (FloorScore Certified) | FloorScore SCS-FS-06499 | Yes |
Phthalate Free | Yes | |
Commercial Warranty | 10 Year Limited Warranty | |
Residential Warranty | Lifetime Warranty | |
Construction | Rigid Core | |
Attached Padding | 1.5 mm IXPE (High Density) | |
Protective Coating | UV, Stain, & Scratch | |
Installation | Rigid Click (SPC) | |
Available Coordinating Trims | T-Molding | Reducer | Flush Stair Nose | End Cap | Overlap Stair Nose | Quarter Round |
All dimensions are nominal
LUXCOM – COMMERCIALLY SUPERIOR
Application | Floor Tile |
---|---|
Colors | Dune, Graphite, Grey, Taupe |
Tile Size | Quarter Round 1”x94”, T-Molding 1.75”x72”, Reducer 1.75”x72”, End Cap 1.5”x94”, Overlap Stair Nose 2”x94”, Flush Stair Nose 4.5”x94”, 12″x24″, 18″x36″ |
Reviews
There are no reviews yet.